QSH6018 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – 60mm/NEMA24 1.8°stepangle high torque hybrids tepper motor

QMOT STEPPER MOTORS
MOTORS
10 mm

INFO These two phase hybrid stepper motors are optimized for mic-
rostepping and give a good fit to the TRINAMIC family of motor
controllers and drivers.
QSH 6018
60 mm / NEMA24
1.8° step angle
high torque
hybrid stepper motor
MAIN CHARACTERISTICS
• NEMA 23 mounting configuration
• flange max. 60.5 mm * 60.5 mm
• 8 mm axis diameter, 25 mm length, D-Cut
• step angle: 1.8˚
• optimized for microstep operation
• optimum fit for TMC239 / TMC249
base driver circuits
• up to 75V operating voltage
• 4 wire connection
• neodymium magnets for maximum torque
• CE approved
• RoHS compliant
SPECIFICATIONS
Rated phase current
UNIT
A
Ph. resistance at 20°C
Ph. inductance (typ.)
mH
Holding torque (typ.)
Ncm
Rotor inertia
gcm²
Weight (mass)
kg
Motor length
mm
-45-28-110
2.8
0.75
2
110
275
0.6
45.0
-56-28-165
2.8
0.9
3.6
165
400
0.77
56.0
-65-28-210
2.8
1.2
4.6
210
570
1.20
65.0
-86-28-310
2.8
1.5
6.8
310
840
1.40
86.0
ORDER CODE
QSH6018-45-28-110
QSH6018-56-28-165
QSH6018-65-28-210
QSH6018-86-28-310
DESCRIPTION
QMot Steppermotor 60 mm, 2.8A, 1.10 Nm
QMot Steppermotor 60 mm, 2.8A, 1.65 Nm
QMot Steppermotor 60 mm, 2.8A, 2.10 Nm
QMot Steppermotor 60 mm, 2.8A, 3.10 Nm
www.trinamic.com – for detailed information and datasheets
77