QSH5718_1 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – new series 57mm/NEMA23 1.8°stepangle high torque hybrids tepper motor

QMOT STEPPER MOTORS
MOTORS
QSH 5718
10 mm
new series 57 mm / NEMA23
1.8° step angle
high torque
hybrid stepper motor

INFO These high torque two phase hybrid stepper motors are opti-
mized for microstepping and give a good fit to the TRINAMIC
family of motor controllers and drivers. They are also used in
the new 57 mm PANdrive mechatronics family.
MAIN CHARACTERISTICS
• NEMA 23 mounting configuration
• flange max. 56.4 mm * 56.4 mm
• 6.35 mm axis diameter, 20.6 mm length
• step angle: 1.8˚
• optimized for microstep operation
• optimum fit for
TMC239 / TMC249 based driver circuits
• up to 75V operating voltage
• 4 wire connection
• neodymium magnets for maximum torque
• CE approved
• RoHS compliant
SPECIFICATIONS
Rated phase current
UNIT
A
Ph. resistance at 20°C
Ph. inductance (typ.)
mH
Holding torque (typ.)
Ncm
Detent torque
Ncm
Rotor inertia
gcm²
Weight (mass)
kg
Motor length
mm
Related PAN-drive
Type
-41-28-055
2.8
0.7
1.4
55
2.0
120
0,45
41.0
PD1-...-57
-51-28-101
2.8
0.83
2.2
101
3.5
275
0.65
51.0
PD2-...-57
-56-28-126
2.8
0.9
2.5
126
3.9
300
0.7
56.0
PD3-...-57
-76-28-189
2.8
1.13
3.6
189
6.6
480
1.00
76.0
PD4-...-57
ORDER CODE
QSH5718-41-28-055
QSH5718-51-28-101
QSH5718-56-28-126
QSH5718-76-28-189
DESCRIPTION
QMot Steppermotor 57 mm, 2.8A, 0.55 Nm
QMot Steppermotor 57 mm, 2.8A, 1,01 Nm
QMot Steppermotor 57 mm, 2.8A, 1.26 Nm
QMot Steppermotor 57 mm, 2.8A, 1.89 Nm
www.trinamic.com – for detailed information and datasheets
93