QSH5718 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – 57mm/NEMA23 1.8° stepangle high torque hybrids tepper motor

QMOT STEPPER MOTORS
MOTORS
QSH 5718
10 mm
57 mm / NEMA23
1.8° step angle
high torque
hybrid stepper motor

INFO These two phase hybrid stepper motors are optimized for
microstepping and give a good fit to the TRINAMIC family of
motor controllers and drivers. They are also used in the 57 mm
PANdrive mechatronics family.
Not for new design! Please use QSH5718 new series instead.
SPECIFICATIONS
Rated phase current
UNIT
A
Ph. resistance at 20°C
Ph. inductance (typ.)
mH
Holding torque (typ.)
Ncm
Detent torque
Ncm
Rotor inertia
gcm²
Weight (mass)
kg
Motor length
mm
Related PAN-drive
Type
-41-30-047
3.0
0.8
1.5
47
2.1
77
0.50
41.0
PD1-...-57
MAIN CHARACTERISTICS
• NEMA 23 mounting configuration
• flange max. 57.2 mm * 57.2 mm
• 6.35 mm axis diameter, 20.6 mm length
• step angle: 1.8˚
• optimized for microstep operation
• optimum fit for
TMC239 / TMC249 based driver circuits
• up to 84V operating voltage
• 4 wire connection
• neodymium magnets for maximum torque
• CE approved
• RoHS compliant
-55-30-098
3.0
0.8
2.1
98
3.0
209
0.70
55.0
PD2-...-57
-79-30-163
3.0
0.8
3.2
163
3.0
335
1.00
78.5
PD3-...-57
ORDER CODE
QSH5718-41-30-047
QSH5718-55-30-098
QSH5718-79-30-163
DESCRIPTION
QMot Steppermotor 57 mm, 3.0A, 0.47 Nm
QMot Steppermotor 57 mm, 3.0A, 0.98 Nm
QMot Steppermotor 57 mm, 3.0A, 1.63 Nm
www.trinamic.com – for detailed information and datasheets
92