QSH4218 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – 42mm/NEMA17 1.8°stepangle high torque hybrid stepper motor

QMOT STEPPER MOTORS
MOTORS
QSH 4218
10 mm
42 mm / NEMA17
1.8° step angle
high torque
hybrid stepper motor

INFO These two phase hybrid stepper motors are optimized for
microstepping and give a good fit to the TRINAMIC family of
motor controllers and drivers. They are also used in the 42 mm
PANdrive mechatronics family.
MAIN CHARACTERISTICS
• NEMA 17 mounting configuration
• flange max. 42.2 mm * 42.2 mm
• 5 mm axis diameter, 20 mm length
• Step angle: 1.8˚
• optimized for microstep operation
• optimum fit for TMC236 / TMC246
based driver circuits
• up to 40V operating voltage
• 4 wire connection
• neodymium magnets for maximum torque
• RoHS compliant
SPECIFICATIONS
Rated phase current
UNIT
A
Ph. resistance at 20°C
Ph. inductance (typ.)
mH
Holding torque (typ.)
Ncm
Detent torque
Ncm
Rotor inertia
gcm²
Weight (mass)
kg
Motor length
mm
Related PAN-drive
Type
-35-10-027
1.0
2.95
4.45
27
1.6
45
0.23
34.5
PD1-...-42
-41-10-035
1.0
2.86
6.74
35
1.6
66
0.30
39
PD2-...-42
-51-10-049
1.0
3.00
5.5
49
2.5
90
0.38
49
PD3-...-42
ORDER CODE
QSH4218-35-10-027
QSH4218-41-10-035
QSH4218-51-10-049
DESCRIPTION
QMot Steppermotor 42 mm, 1A, 0.27 Nm
QMot Steppermotor 42 mm, 1A, 0.35 Nm
QMot Steppermotor 42 mm, 1A, 0.49 Nm
www.trinamic.com – for detailed information and datasheets
75