QSH2818 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – 28mm/NEMA11 1.8°stepangle high torque hybrids tepper motor

QMOT STEPPER MOTORS
10 mm
MOTORS
QSH 2818
28 mm / NEMA11
1.8° step angle
high torque
hybrid stepper motor
INFO These two phase hybrid stepper motors are optimized for micro-
stepping and give a good fit to the TRINAMIC family of motor
controllers and drivers. They can be used in very space critical
applications and allow high RPM due to their low back EMF.
They are also used in the 28mm PANdrive mechatronics familiy.
MAIN CHARACTERISTICS
• NEMA 11 mounting configuration
• flange max. 28 mm * 28 mm
• 5 mm axis diameter, 20 mm length, D-Cut
• step angle: 1.8˚
• optimized for microstep operation
• optimum fit for TMC222 / TMC236 / TMC246
based driver circuits
• 4 wire connection
• neodymium magnets for maximum torque
• CE approved
• RoHS compliant
SPECIFICATIONS
Rated phase current
UNIT
A
Ph. resistance at 20°C
Ph. inductance (typ.)
mH
Holding torque (typ.)
Ncm
Detent torque
Ncm
Rotor inertia
gcm²
Weight (mass)
kg
Motor length
mm
Related PAN-drive
Type
-32-07-006
0.67
5.6
3.4
6
9
0.11
32.0
PD1-...-42
-51-07-012
0.67
9.2
7.2
12
18
0.20
51.0
PD3-...-42
ORDER CODE
QSH2818-32-07-006
QSH2818-51-07-012
DESCRIPTION
QMot Steppermotor 28 mm, 0.67A, 0.06 Nm
QMot Steppermotor 28 mm, 0.67A, 0.12 Nm
www.trinamic.com – for detailed information and datasheets
74