BB-301 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – Baseboard for one TMCM-301/TMCM-341 and up to 3TMCM-035

BASEBOARDS FOR STEPPER MODULES
10 mm
MODULES
BB-301
Baseboard
for one TMCM-301/TMCM-341
and up to 3 TMCM-035
INFO The BB-301 baseboard is designed for the TMCM-301 or TMCM-
341 stepper controller to operate with up to three TMCM-035
power drivers. It provides a very small and cost effective solu-
tion for a motion control application for up to three size 57 mm
stepper motors.
All motor, switch and power lines are accessible via screw ter-
minals. For the general purpose I/Os there is a dual-in-line pin
connector. The integrated switch-mode regulator provides the
required 5V supply voltage for the modules. The supply voltage
input is protected against wrong polarity. The integrated level
shifter enables direct connection to a PC or host controller via
different interfaces.
MAIN CHARACTERISTICS
ELECTRICAL
DATA
INTERFACE
• 15V to 50V DC supply voltage
• all options of the TMCM-301 are supported,
additionally a USB interface type is available
• 6 x limit switch,
8 general purpose digital/analog in,
8 general purpose digital out
FEATURES • 1 slot for the TMCM-301/TMCM-341 motion
control module
• 3 slots for TMCM-035 power drivers
• 16 times microstepping for the motors
• integrated 5V power supply
• protection: overvoltage suppressor
and inverse polarity
OTHER • screw terminal connectors for I/O signals
• RoHS compliant
• size: 90 x 87 mm², 60 mm height
20
I/Os
BB-301
RS-232
or
RS-485
or
CAN
SPI
TMCM-301
15.. 50V DC _{5V Power Supply}
6
TMCM-035
TMCM-035
TMCM-035
Step
Motor
Step
Motor
Step
Motor
REF-Switches
ORDER CODE
BB-301 (-option)
OPTIONS
232
485
CAN
USB
DESCRIPTION
Baseboard for TMCM-301/TMCM-341 + 3x TMCM-035
RS-232 interface
RS-485 interface
CAN interface
USB interface (on request)
www.trinamic.com – for detailed information and datasheets
52