|
BB-160 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – Baseboard for TMCM-160 | |||
|
BASEBOARDS FOR BLDC MODULES
10 mm
MODULES
BB-160
Baseboard for
TMCM-160
INFO The baseboard BB-160 allows to build a ready to use BLDC mo-
tor driver unit using the TMCM-160 driver module. It integrates
velocity and torque (via current) control as well as a hall sensor
based positioning mode. The position resolution depends on
the motor, i.e. a standard 8 pole motor gives a motor axis reso-
lution of 15 degrees. The module can be used in stand alone
operation (analog control) or it can be remotely controlled via
RS-232 (or RS-485).
All important signals and the power supply lines can be con-
nected easily. For motor, power supply and hall sensors screw
terminals are available and for RS232 (or RS485) a 9-pin D-SUB
connector. Some signals like the analog inputs are adjustable
either onboard or they can be remote controlled.
BB-160
RS-232
TMCM-160
Motor off
Direction
âclassicâ
Analog control
14..36V DC
Onboard controls
10V supply
3 LEDs
BLDC
Motor
HALL
sensors
MAIN CHARACTERISTICS
ELECTRICAL
DATA
FEATURES
⢠14V to 40V supply voltage
⢠fast prototyping of motion control
applications with BLDC motors (e.g. lab use)
⢠ad-hoc evaluation of the TMCM-160
module without the need for developing
a custom PCB
⢠BB-160 + TMCM-160 suitable even
for series production
⢠RS-232 or RS-485 Interface
HIGHLIGHTS ⢠screw connectors for motors
and hall sensors for fast prototyping
⢠access to all control inputs
of the TMCM-160
⢠screw holes for reliable mounting
beyond prototyping
⢠setting of motor voltage and current
by two potentiometers
OTHER ⢠RoHS compliant
⢠size: 120 x 85 mm²
ORDER CODE
BB-160
DESCRIPTION
Baseboard for TMCM-160
www.trinamic.com â for detailed information and datasheets
50
|