VPM36-1390 Datasheet, PDF (1/2 Pages) TRIAD MAGNETICS – POWER TRANSFORMER CHASSIS MOUNT : TOROIDAL MEDICAL SERIES

POWER TRANSFORMER
CHASSIS MOUNT :
TOROIDAL MEDICAL SERIES
VPM36-1390
Description:
The toroidal construction inherently reduces stray fields, increases efficiency and minimizes
size compared to traditional EI transformers. The addition of a Flux Band further reduces the
remaining stray fields. The shield between Primary and Secondary improves safety, reduces
common mode signals and minimizes leakage current. Built with a Class F (155°) insulation
system. A 140°C self-resetting thermal switch is included in each primary.
Electrical Specifications (@25C)
1. Maximum Power: 50VA
2. Input Voltages: 100, 120, 220, 240VAC, 50/60Hz
3. Output Voltages: 18VAC @ 2.78A or 36VAC CT @ 1.39A
4. Voltage Regulation: 11.5% TYP from full load to no load
5. Temperature Rise: 45°C TYP
6. Hipot: 4000VAC, Primary to Secondary, Primary & Secondary to Shield & mounting surface
7. Efficiency: 89% TYP. @ full load
Agency File:
UL: File E122529, UL 60601-1/(R) 2012 Medical Electrical Equipment – Part 1
CE: ES 60601-1 (IEC 60601-1:2005, MOD)
cUL: C22.2 No. 60601-1:14, Medical Electrical Equipment – Part 1
CB Certified.
Photo for illustration only RRoHoHSS
2021011/615/6/E5/UEU
OD
Dimensions: Inches (mm)
O.D.
I.D.
HT.*
3.6 (92) 1.2(31) 1.5(38)
*Add 0.188 (3) to the height for mounting hardware
Weight: 0.7Kg
Mounting:
Transformer is provided with one metal mounting plate, two rubber pads, M5 x 45mm bolt, nut,
spring and flat washer.
Connections:
Transformer is provided with 8” (203mm) long, 0.25” (6.35mm) 12” (305mm) long, 0.5”
(12.7mm) stripped and tinned, stranded
UL 1015 lead wire. Primaries are 22AWG, Secondaries are 20AWG, and Shield is 20AWG.
The GRN/YEL shield lead is typically grounded. Do not lift transformer by leads!
MOUNTING
METAL
PLATE
H
SPRING
WASHER
BOLT
FLAT
WASHER
RUBBER
PAD
RUBBER
NUT
PAD
Input Options:
100VAC: Input to Gray & Blue, jumper White & Brown, jumper Blue & Violet.
120VAC: Input to White & Blue, jumper White & Brown, jumper Blue & Violet.
220VAC: Input to Gray & Violet, jumper Blue & Brown
240VAC: Input to White and Violet, jumper Blue & Brown
Output Options:
120VAC: Output from Black & Red, jumper Black & Orange, jumper Red to Yellow
240VAC: Output from Black & Yellow, jumper Red & Orange
WHT
GRY
BL U
PRI
BRN
BL K
RED
SEC
ORG
Primary and secondary windings are designed to be connected in series or parallel. Windings
are not intended to be used independently.
VIO
YEL
RoHS Compliance: Meets the requirements of 2011/65/EU, known as the RoHS 2 initiative.
GRN/YEL
S C H E MA TIC
* At printing, this document is considered “uncontrolled”. Contact Triad Magnetics’ website for current version
Web: www.TriadMagnetics.com
Phone [phone]
Fax [phone]
460 Harley Knox Blvd.
Perris, California 92571
Publish Date: June 19, 2015