N-1X Datasheet, PDF (1/1 Pages) TRIAD MAGNETICS – CHASSIS MOUNT : Autotransformer

POWER TRANSFORMER
CHASSIS MOUNT : Autotransformer
N-1X
Electrical Specifications (@25ºC)
1. Maximum Power: 50 VA
2. Input Voltage:
230 V, 50 / 60 Hz
3. Output Voltage:
115V + 5%
4. Full Secondary Load: 0.87 Amps RMS
Construction:
Single winding on a double wall, nylon bobbin. This chassis mount design
comes in a channel frame with .187” diameter holes in the mounting ears.
Description:
Secondary coil is a fraction of the entire winding for voltage step-down.
This causes part of the power to be transferred conductively through the
windings, rather than all of the power being transferred by induction.
Safety:
These units are designed with 1500V isolation between the winding and the
A
core. Materials and construction are rated for Class B insulation system.
Dimensions:
A
B
Unit: In inches
C
D
2.281 3.687 2.00 3.125
Weight: 1.5 lbs
Connections: 7.0±1” leads, 0.250±0.062” Skin & Tin
B
D
C
Schematic:
230V
115V
OV
For 230V input: Blk to Red
For 115 output: Blk to Blk/Red
RED
BLK/RED
BLK
RoHS Compliance: As of manufacturing date February 2005, all standard products
meet the requirements of 2011/65/EU, known as the RoHS initiative.
* Upon printing, this document is considered “uncontrolled”. Please contact
Triad Magnetics’ website for the most current version.
Web: www.TriadMagnetics.com
Phone [phone]
Fax [phone]
460 Harley Knox Blvd.
Perris, California 92571
Publish Date: December 4, 2013