FS12-1600 Datasheet, PDF (1/1 Pages) TRIAD MAGNETICS – PC MOUNT:SPLIT PACK

POWER TRANSFORMER
P C M O U N T : SPLIT PACK
FS12-1600
Description:
The FS12-1600 is a dual primary and dual secondary, split bobbin design which
operates with either a parallel input of 115V or a series input of 230V. The output
voltage will be either 12.6V with a center-tap under a 1.6A load with the
secondaries wired in series, or 6.3V under a 3.2A load with the secondaries wired
in parallel. The split bobbin design eliminates the need for costly electrostatic
shielding.
Electrical Specifications (@25C)
1. Maximum Power: 20.0VA
2. Primary: Series: 230V; Parallel: 115V
3. Secondary: Series: 12.6V CT@ 1.6A; Parallel: 6.3V @ 3.2A
4. Voltage Regulation: 25% TYP @ full load to no load
5. Temperature Rise: 25C TYP
6. Hipot tested 100% at 2500 VRMS
Construction:
Three flange bobbin construction with primaries and secondaries wound side by
side for low capacitive coupling.
Agency File:
UL: File E53148, UL 5085-2 (506), Class B General Purpose Transformer,
cUL: File E53148, UL 5085-2 (506), Class B General Purpose Transformer,
Canadian Use (CSA 22.2, No.66.2-06)
This model is also available in Class 2, UL 5085-3 (1585) version as FS12-1600-C2
W
E
L
Dimensions:
H
W
L
1.437 1.875 2.25
Weight: 0.80 lbs
Schematic:
1
115/230V 2
50/60Hz 3
4
A
0.300
B
0.400
C
1.600
Units in inches.
D
E
F
0.041 0.020 0.234
PARALLEL
SERIES
5
1
1
6
115/230V
2
115/230V
2
7
50/60Hz
3
50/60Hz
3
8
4
4
H
12 34
D
F
A
5
A
8
B
C
RoHS Compliance: As of manufacturing date February 2005, all standard products meet
the requirements of 2011/65/EU, known as the RoHS initiative.
As of April 7, 2008, UL standards 506 and 1585 will be migrated to UL 5085-2 and
5085-3, respectively.
* Upon printing, this document is considered “uncontrolled”. Please contact
Triad Magnetics’ website for the most current version.
1
4
0.06" DIAMETER
HOLE
Board Layout
Web: www.TriadMagnetics.com
Phone [phone]
Fax [phone]
460 Harley Knox Blvd.
Perris, California 92571
Publish Date: December 4, 2013