TEN40_07 Datasheet, PDF (9/9 Pages) TRACO Electronic AG – DC/DC Converters

DC/DC Converters
TEN 40
40 Watt
Physical Specifications
Case material copper, nickel plated
Baseplate material none conductive FR4
Potting material epoxy (UL 94V-0 -rated)
Weight 65 g (2.3 oz)
Soldering temperature max. 265 °C / 10 sec.
Outline Dimensions
9
8
3
7
6
Bottom
view
2
1
5
4
3.5
(0.14)
10.2
(0.4)
Dimensions in [mm], () = Inch
Pin diameter: 1.0 ±0.05 (0.04 ±0.002)
Pin pitch tolerances: ±0.35 (±0.014)
Case tolerances: ±0.5 (±0.02)
45.7
(1.8)
50.8
(2.0)
Pin-Out
Pin Single
Dual
Dual
symmetric assymmetric
Triple
1
+Vin (Vcc) +Vin (Vcc) +Vin (Vcc) +Vin (Vcc)
2 –Vin (GND) –Vin (GND) –Vin (GND) –Vin (GND)
3
Remote On/Off
4
No con.
No pin
+ Vout 1
+ Vout 2
5
–Sense
+Vout
–Vout Common 2/3
6
+Sense
Common
No con.
–Vout 3
7
+Vout
Common
No con.
+Vout 1
8
–Vout
–Vout
+Vout 2
–Vout 1
9
Trim
Trim
–Vout2
No con.
Heat-sink TEN-HS3
56.0 (2.2) max.
Heat-sink
Thermal pad
Clamp
Converter
17.0 (0.67)
max.
Order code: TEN-HS3
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish:
Anodic treatment (black)
Weight:
22g (0.78oz) (without converter)
Note:
The product label on converter has to be removed before
mounting the heat-sink.
For volume orders converters will be supplied with heat-
sinks already mounted. Please contact factory for quota-
tion.
Separate heat-sinks are only available for prototypes and
small quantity orders.
Specifications can be changed any time without notice.
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. [phone] · Fax [phone] · [e-mail] · www.tracopower.com
Rev. 10/07
Page 9 of 9