THM10WI_15 Datasheet, PDF (3/3 Pages) TRACO Electronic AG – DC/DC Converters

DC/DC Converters
THM 10WI Series 10 Watt
General Specifications
Temperature ranges
– Operating –40°C to +90°C (with derating)
– Casing +105°C max.
– Storage –55°C to +125°C
Derating 3.5 %/K above +70°C
Humidity (non condensing) 95 % rel H max.
Temperature coefficient ±0.02 %/K typ.
Altitude 5000 m
Switching frequency 300 kHz ±30 kHz. (puls width modulation)
I/O isolation voltage
– to meet ES/IEC/EN 60601-1 5000 VACrms, rated for 250 VACrms working
(50Hz, 60sec.) voltage, 2 x MOPP
Clearance/creepage 8 mm min.
Leakage current 2 µA max. (at 240 VAC, 60 Hz)
Isolation capacitance
– Input/Output 17 pF max. (at 100 KHz, 1 V)
Safety standards ANSI/AAMI ES 60601-1:2005/(R)2012,
UL 60601-1, IEC/EN 60601-1 3rd edition
– Certification documents www.tracopower.com/overview/thm10wi
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >3.8 Mio h
Casing material non conductive plastic (UL 94V-0-rated)
Potting material silicone (UL 94V-0-rated)
Vibration and thermal shock resistance according to MIL-STD-810F
Weight 14.0 g (0.48 oz)
Soldering temperature max. 265°C / 10 sec.
Environmental compliance – Reach www.tracopower.com/overview/thm10wi
– RoHS according RoHS directive 2011/65/EU
- The component is not be used in an oxygen rich environment.
- The component is not to be used in conjunction with flammable anaesthetics and agents.
- The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment).
- A modification of the component is not allowed.
Outline Dimensions
Standard pinning
2
11
Bottom view
23 22
16 14
31.8 (1.25)
Optional pinning: suffix -A1
1
24 23
11 12
Bottom view
15 13
31.8 (1.25)
4.5
(0.18)
2.54
(0.10)
15.24 (0.60)
5.08
(0.20)
Dimensions in [mm], () = Inch
Pin ø 0.6 ±0.1 (0.024 ±0.004)
2.0
(0.08)
2.54
(0.10)
20.32 (0.80)
2x2.54
(2x0.1)
Tolerances ±0.5 (±0.02)
Pin pich tolerances ±0.25 (±0.01)
Standard Pinout
Pin
Single
Dual
2
–Vin (GND)
–Vin (GND)
11
No con.
–Vout
14
+Vout
+Vout
16
–Vout
Common
22
+Vin (Vcc)
+Vin (Vcc)
23
+Vin (Vcc)
+Vin (Vcc)
Optional Pinout
Pin
Single
Dual
1
+Vin (Vcc)
+Vin (Vcc)
11
No pin
Common
12
–Vout
No pin
13
+Vout
–Vout
15
No pin
+Vout
23 –Vin (GND)
–Vin (GND)
24 –Vin (GND)
–Vin (GND)
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Rev. October 27. 2015
Page 3 of 3