THD10_08 Datasheet, PDF (3/3 Pages) TRACO Electronic AG – DC/DC Converters

DC/DC Converters
THD 10 Series 10 Watt
Physical Specifications
Case material steel, nickel plated
Baseplate material non conductive FR4
Potting material silicon rubber TES (UL94V-0 rated)
Weight 17.3 g (0.61 oz)
Soldering temperature max. 265 °C / 10 sec.
Outline Dimensions
23
2
22
3
Insulated Baseplate
4.1 10.2
(0.16) (0.40)
16
9
14
11
2.5
(0.10)
15.24 (0.60)
20.3 (0.80)
Pin-Out
Pin
Single
Dual
2
–Vin (GND)
–Vin (GND)
3
–Vin (GND)
–Vin (GND)
9
No pin.
Common
11
No con.
–Vout
14
+Vout
+Vout
16
–Vout
Common
22
+Vin (Vcc)
+Vin (Vcc)
23
+Vin (Vcc)
+Vin (Vcc)
Dimensions in [mm], () = Inch
Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)
Tolerances ±0.5 (0.02)
Pin pitch tolerances ±0.35 (0.014)
Specifications can be changed any time without notice.
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. [phone] · Fax [phone] · [e-mail] · www.tracopower.com
Rev. 03/08
Page 3 of 3