THD10WIN Datasheet, PDF (3/3 Pages) TRACO Electronic AG – DC/DC Converters

DC/DC Converters
THD 10WIN Series 10 Watt
General Specifications
Remote On/Off
– On: 3.5 ... 12 VDC or open circuit
– Off: 0 ... +1.2 VDC or short circuit pin 1 and pin 2
– Off idle current: 10 mA max.
Switching frequency 330 kHz typ.
Safety standards UL/cUL 60950-1, IEC/EN 60950-1
Safety approvals
– CSA certificate of compliance CAN/CSA-C22.2 No 60950-1-07, Am 1:2011
ANSI/UL Std No 60950-1, 2nd Ed, AM 1:2011
– CB test certificate IEC 60950-1:2005 2nd Ed, Am 1:2009
– Certification documents www.tracopower.com/overview/thd10win
Environmental compliance – Reach www.tracopower.com/overview/thd10win
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing metal with non conductive baseplate
Pin copper alloy with gold plated nickel subplate
Weight 17.3 g (0.61 oz)
Soldering temperature (1.5mm from case for 10 sec.) max. 260°C
Application note: www.tracopow_pere.cno^dmⁱ/ⁿp^groducts/thd10win-application.pdf
Outline Dimensions
12 3
9 11
Bottom view
23 22
16 14
2.54
(0.10)
15.24 (0.60)
31.8 (1.25)
5.08 4.5
(0.20) (0.18)
4.5
(0.18)
2.54
(0.10)
15.24 (0.60)
5.08
(0.20)
Pin-Out
Pin
Single
Dual
1 Remote On/Off Remote On/Off
2 –Vin (GND)
–Vin (GND)
3
–Vin (GND
9
No pin
11 No function
14
+Vout
16
–Vout
–Vin (GND
Common
–Vout
+Vout
Common
22 +Vin (Vcc)
23 +Vin (Vcc)
+Vin (Vcc)
+Vin (Vcc)
Dimensions in [mm], () = Inch
Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)
Tolerances ±0.5 (±0.02)
Pin pitch tolerances ±0.25 (±0.01)
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Rev. March 23. 2015
Page 3 of 3