THB10 Datasheet, PDF (3/3 Pages) TRACO Electronic AG – DC/DC Converters

DC/DC Converters
THB 10 Series
10 Watt
General Specifications
Temperature ranges
– Operating –40°C to +75°C
– Case +95°C max.
– Storage –50°C to +125°C
Derating 2.5 %/K above 55°C
Humidity (non condensing) 95 % rel H max.
Altitude during operation 4000 m
Temperature coefficient ±0.02 %/K typ.
Reliability, calculated MTBF (MIL-HDBK-217F @ 25°C, ground benign) >1’000’000 h
Switching frequency 150 kHz typ. (puls width modulation)
Casing material non conductive plastic (UL 94V-0-rated)
Pin Material copper alloy with gold plate over nickel subplate
Weight 24.5 g (0.86 oz)
Soldering temperature max. 260°C / 10 sec.
Outline Dimensions
Pin-Out
Pin
Single
1
+Vin (Vcc)
2
-Vin(GND)
Dual
+Vin (Vcc)
-Vin(GND)
3
+Vout
4
No pin
5
-Vout
+Vout
Common
-Vout
Dimensions in [mm], () = Inch
Pin diameter ø 1.0 ±0.05 (0.04 ±0.002)
Tolerances ±0.25 (±0.01)
Pin pich tolerances ±0.13 (±0.005)
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Rev. November 15. 2013
Page 3 of 3