TEN20_07 Datasheet, PDF (3/3 Pages) TRACO Electronic AG – DC/DC Converter

DC/DC Converter
TEN 20 Series 20 Watt
General Specifications
Remote ON/OFF
ON:
OFF:
OFF standby input current:
Control common:
Safety standards
Savety approvals
Physical Specifications
Case material
Baseplate
Potting material
Weight
Soldering temperature
Outline Dimensions mm (inches)
50.8 ±0.5
(2.0 ±0.02)
3
1
2
Bottom View
4
6
5
20.32 15.2 ±0.5
(0.80) (0.60 ±0.02)
2.5 ... 100 VDC or open circuit.
-1 ... 1.0 VDC or short circuit pin 2 and pin 6
5 mA max.
referenced to negativ input
UL 60950, EN 60950, IEC 60950 Compliance
up to 60 VDC input voltage (SELV limit)
CSA
Copper, Nickel plated
non conductive FR4
Silicon rubber TSE (UL 94V-0 rated)
30g (1.05oz)
max. 260 °C / 10 sec.
Pin-Out
Pin
Single
Dual
1 +Vin (Vcc) +Vin (Vcc)
2 –Vin (GND) –Vin (GND)
3
+Vout
+Vout
4
No pin
Common
5
–Vout
–Vout
6 Remote on/off Remote on/off
Insulated baseplate
Pin diameter ø 1.0 ±0.05 (0.039 ±0.002)
Dimensions in mm (Inch), Tolerance ±0.25 ( 0.02)
Specifications can be changed any time without notice
Jenatschstrasse 1 • CH-8002 Zurich • Switzerland
Tel. [phone] • Fax [phone] • [e-mail] • www.tracopower.com
Rev. 06/07
Page 3 of 3