TEN10-1210 Datasheet, PDF (3/3 Pages) TRACO Electronic AG – DC/DC Converter

General Specifications
Switching frequency (fixed)
Safety standards
Savety approvals
Physical Specifications
Case material
Baseplate
Potting material
Weight
Soldering temperature
Outline Dimensions mm (inches)
15.2 ±0.5
(0.6 ±0.02)
50.8 ±0.5
(2.0 ±0.02)
20.32
(0.8)
3
Bottom View
1
2
4
6
5
DC/DC Converter
TEN 10 Series
10 Watt
300 kHz typ. (Pulse width modulation PWM)
UL 1950, EN 60950, IEC 60950
Compliance up to 60 VDC input voltage(SELV limit)
UL /cUL File E188913
Steel chrome-nickel plated
Epoxy
Silicon rubber TES (flammability to UL 94V-0)
30 g (1.2 oz)
max. 250 °C / 10 sec.
Pin-Out
Pin
Single
Dual
1 +Vin (Vcc) +Vin (Vcc)
2 –Vin (GND) –Vin (GND)
3
+Vout
+Vout
4
No pin
Common
5
–Vout
–Vout
Case ground Case ground
6
(option)
(option)
Insulated baseplate
Pin diameter ø 1.0 ±0.05 (0.039 ±0.002)
Specifications can be changed without notice
Rev. 06/00
Jenatschstrasse 1 • CH-8002 Zurich • Switzerland
Tel. [phone] • Fax [phone] • e-mail: [e-mail] • internet: http://www.tracopower.com Page 3