PHV Datasheet, PDF (2/4 Pages) TRACO Electronic AG – HV-Power Supplies (PHV Series 3.5 - 5 Watt)

HV-Power Supplies
PHV Series
3.5 - 5 Watt
Input Specifications
Input voltage
+10.8VDC to +16.5 VDC
Reverse voltage protection
none
Conducted noise (input)
Output Specifications
internal filter
Voltage accuracy
±5%
Voltage adjustement range
0 – 100%
(adjustable with external voltage 0 to +6 VDC or with 5 kOhm varaiable resistor)
Remote ON /OFF control
ON = pin 2 to pin 5 open
OFF = pin 2 to pin 5 short
Regulation
– Input variation Vin min. to Vin max.
– Load variation 0 – 100 %
± 0.01 % max.
± 0.01 % max.
Ripple and noise (20 MHz Bandwidth)
100 mVpk-pk max.
Temperature coefficient
± 0.01 % / °C
Stability
0.05% 8h after warm-up time
Current limitation
>110% of Iout max., constant current
Short circuit protection
General Specifications
indefinite
Temperature ranges – Operating
– Case temperature
– Storage
– 10 °C ... + 50 °C
+ 90 °C max.
– 25 °C ... + 75 °C
Derating above 40°C
4 % /°C
Humidity (non condensing)
30 – 95 % rel H max.
Efficiency
60 – 65%
Reliability, calculated MTBF (MIL-HDBK-217 E)
>300’000 h @ + 25 °C
Isolation voltage Input/Output
none
Vibration
5 –10 Hz amplitude 10 mm pk-pk
10 – 55 Hz acceleration 2 G
Shock
Physical Specifications
acceletration 20 G max. time 11 ms
Case material
steel chrom-nickel plated
Weight
65 g (2.29 oz)
Soldering temperature
max. 260 °C / 10 sec.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2