TEP160 Datasheet, PDF (1/4 Pages) TRACO Electronic AG – DC/DC Converters

DC/DC Converters
TEP 160 Series, 150 – 196 Watt
Features
◆ Compact metal package
◆ Wide 2:1 input voltage ranges
16.5–36, 33–75 VDC
◆ Very high efficiency up to 93%
◆ No minimum load
◆ Soft start
◆ Ajustable output voltage +10/-20%
◆ Sense line
◆ Remote On/Off input
◆ Reverse input voltage protection
◆ Over temperature protection
◆ Optional Heatsink
◆ 3-year product warranty
(Models pictured with optional heatsink)
The TEP 160 Series is a family of isolated high performance dc-dc converter modules
with wide 2:1 input voltage ranges which come in a rugged, sealed industry stan-
dard half brick package.
A very high efficiency allows full power operation without forced air cooling at 25°C
This temperature can be increased to 40°C with optional mounted heatsink or up
to 60°C when mounted on an iron base plate. The very wide input voltage range
and reverse input voltage protection make these converters interesting solution for
battery operated systems. Typical applications are in telecom/datacom, industry
control and railway systems for on board power distribution.
These series is available in many optional designs on demand --> see options.
Standard Models
Order code
TEP 160–2412
TEP 160–2413
TEP 160–2415
TEP 160–2416
TEP 160–2418
TEP 160–4812
TEP 160–4813
TEP 160–4815
TEP 160–4816
TEP 160–4818
TEP 160–48153
Input voltage
16.5 – 36 VDC
(24 VDC nominal)
33 – 75 VDC
(48 VDC nominal)
Output voltage
12 VDC
15 VDC
24 VDC
28 VDC
48 VDC
12 VDC
15 VDC
24 VDC
28 VDC
48 VDC
53 VDC
Output current max.
13 A
10 A
6.5 A
5.5 A
3.3 A
16 A
13 A
8A
7A
4A
3.7 A
Efficiency typ.
92 %
92 %
93 %
93 %
92 %
92 %
93 %
92 %
92 %
92 %
92 %
Options
TEP-HS1
TEP-MK1
TCK-xxx
on demand
Heat-sink for standard version (incl. mounting screws and thermal pad)
Din-rail mounting kit for chassis mount models (incl. mounting screws)
Common mode chokes for filter proposals to meet EN55022 class A/B --> see application note
Models with 3.3 VDC/~ 40 A or 5.0 VDC/~ 30 A output
Negative (passive = Off) Remote On/Off function (standard is passive = On)
Sync pin to synchronize switching frequency of up to 3 units (EMC reason)
http://www.tracopower.com
Page 1 of 4