|
TEP100WIR Datasheet, PDF (1/5 Pages) TRACO Electronic AG – The TEP 100WIR Series is a family of isolated high performance | |||
|
DC/DC Converters
TEP 100WIR Series, 100 Watt
Features
â Compact metal package
â Ultra wide 4:1 input voltage ranges
8.5â36, 16.5â75, 43â160 VDC
â EN 50155 approval for railway
applications
â Very high efficiency up to 92%
â No minimum load
â Soft start
â Ajustable output voltage +10/-20%
â Sense line
â Remote On/Off input
â Under voltage lock-out circuit
â Reverse input voltage protection
â Over temperature protection
â Optional Heatsink
â Optional as chassis mount models with
screw terminal block and EMI Filter
â 3-year product warranty
(Models pictured with optional heatsink)
The TEP 100WIR Series is a family of isolated high performance dc-dc converter
modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed
industry standard half brick package.
A very high efficiency allows full power operation without forced air cooling at 60°C
This temperature can be increased to 70°C with optional mounted heatsink or up
to 85°C when mounted on an iron base plate. The very wide input voltage range
and reverse input voltage protection make these converters interesting solution for
battery operated systems. Typical applications are in telecom/datacom, industry
control and railway systems for on board power distribution.
These series is available in many optional designs on demand --> see options.
Standard Models
Order code
TEP 100â2412WIR
TEP 100â2415WIR
TEP 100â2416WIR
TEP 100â2418WIR
TEP 100â4812WIR
TEP 100â4815WIR
TEP 100â4816WIR
TEP 100â4818WIR
TEP 100â7212WIR
TEP 100â7215WIR
TEP 100â7216WIR
TEP 100â7218WIR
Input voltage
8.5 â 36 VDC
(24 VDC nominal)
16.5 â 75 VDC
(48 VDC nominal)
43 â 160 VDC
(110 VDC nominal)
Output voltage
12 VDC
24 VDC
28 VDC
48 VDC
12 VDC
24 VDC
28 VDC
48 VDC
12 VDC
24 VDC
28 VDC
48 VDC
Output current max.
8.4 A
4.2 A
3.6 A
2.1 A
8.4 A
4.2 A
3.6 A
2.1 A
8.4 A
4.2 A
3.6 A
2.1 A
Efficiency typ.
90 %
90 %
90 %
90 %
90 %
90 %
92 %
91 %
90 %
90 %
90 %
91 %
Options
TEP-HS1
TEP-MK1
TCK-xxx
on demand
Heat-sink for standard version (incl. mounting screws and thermal pad)
Din-rail mounting kit for chassis mount models (incl. mounting screws)
Common mode chokes for filter proposals to meet EN55022 class A/B --> see application note
Models with 3.3 VDC/~ 25 A or 5.0 VDC/~ 20 A or 15 VDC/~ 6.7 A output
Chassis mount models with screw terminal block
Chassis mount models with screw terminal block and input filter to meet EN 555022 class A
Negative (passive = Off) Remote On/Off function (standard is passive = On)
Sync pin to synchronize switching frequency of up to 3 units (EMC reason)
http://www.tracopower.com
Page 1 of 5
|
▷ |