THN20 Datasheet, PDF (3/4 Pages) Touchstone Semiconductor Inc – DC/DC Converters

DC/DC Converters
THN 20 Series 20 Watt
Output Specifications
Max. capacitive load





3.3 VDC models:
5 VDC models:
12 VDC models:
15 VDC models:
±12 VDC models:
±15 VDC models:
7’000 µF
5’000 µF
850 µF
700 µF
500 µF (each output)
350 µF (each output)
General Specifications
Temperature ranges
– Operating without heat sink –40°C to +75°C (with derating)
– Operating with heat sink –40°C to +85°C (with derating)
– Case temperature +105°C max.
– Storage –55°C to +125°C
Power derating
– Operating without heat sink 2.0 %/K above 60°C
– Operating with heat sink 2.0 %/K above 70°C
Thermal inpedance
– Natural convection 17.6°C/W
– Natural convection with heat sink 14.8°C/W
Humidity (non condensing) 5 % to 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >550’000 h
Isolation voltage (60sec.) – Input/Output 1’500 VDC
Isolation capacitance
– Input/Output 1000 pF typ.
Isolation resistance
– Input/Output (500 VDC) >1’000 MOhm
Remote On/Off
– On: 3.0 ... 15 VDC or open circuit
– Off: 0 ... 1.2 VDC or short circuit pin 6 and pin 2
– Off idle current: 1.5 mA
Switching frequency (fixed) 330 kHz typ. (pulse width modulation PWM)
Vibration and thermal shock EN 61373, MIL-STD-810E
Safety standards UL /cUL 60950-1, EN 60950-1, IEC 60950-1
Safety approvals
– UL/cUL www.ul.com -> certifications -> File e188913t
Physical Specifications
Casing material nickel coated copper
Baseplate non conductive FR4
Potting material silicone (UL 94V-0 rated)
Weight 15 g (0.53 oz)
Soldering temperature max. 265°C / 10 sec.
Environmental compliance – Reach www.tracopower.com/products/thn20-reach.pdf
– RoHS RoHS directive 2011/65/EU
Application note: www.tracopower.com/products/thn20-application.pdf
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4