THL3WISM Datasheet, PDF (3/3 Pages) Touchstone Semiconductor Inc – DC/DC Converters

DC/DC Converters
THL 3WI(SM) Series 3 Watt
Pysical Specifications
Casing material non-conductive plastic (UL94V-0 rated)
Package weight

DIP models: 5.4 g (0.19 oz)
SMD models: 4.2 g (0.14 oz)
Environmental compliance – Reach regulation EC 1907/2006
– RoHS directive 2011/65/EU
Soldering profile for DIP-package models max. 265°C / 10 sec. (wave soldering)
Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at:
www.jedec.org - free registration required)
Moisture sensivity level (for SMD-package models) level 2a as per J-STD-033B.01 (to find at:
www.jedec.org - free registration required)
Packaging www.tracopower.com/products/thl3wism-pack.pdf
Application note: www.tracopower.com/products/thl3wi-application.pdf

www.tracopower.com/products/thl3wism-application.pdf
Outline Dimensions
DIP-Models
4.1
(0.16)
0.5
(0.02)
8.0
(0.31)
SMD-Models
16
1
2
1.77
(0.07)
10
7
9
8
10.16 (0.4)
13.7 (0.54)
Pin-Out
Pin
Single
1
–Vin (GND)
Dual
–Vin (GND)
2
Remote On/Off Remote On/Off
7
ntc.
ntc.
8
ntc.
Common
9
+Vout
+Vout
10
–Vout
–Vout
16
+Vin (Vcc)
+Vin (Vcc)
ntc. = not to connect
8.0 (0.31)
0.25
(0.01)
13.7 (0.54)
18.1 (0.71)
Specifications can be changed any time without notice.
Dimensions in [mm], () = Inch
Tolerances: ±0.25 (±0.01)
Pin pich tolerances: ±0.13 (±0.005)
Rev. 08/12
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. [phone] · Fax [phone] · [e-mail] · www.tracopower.com
Page 3 of 3