THI2M Datasheet, PDF (3/3 Pages) Touchstone Semiconductor Inc – DC/DC Converters

DC/DC Converters
THI 2M Series
2 Watt
General Specifications
Casing material non conductive plastic (UL 94V-0 rated)
Weight 5.1 g (0.18oz)
Soldering temperature max. 265°C / 10 sec
Application note: www.tracopower.com/products/thi2m-application.pdf
- The component is not be used in an oxygen rich environment.
- The component is not to be used in conjunction with flammable anaesthetics and agents.
- The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment).
- A modification of the component is not allowed.
Outline Dimensions
16
1
3.2
(0.13)
0.5 (0.02)
8.6 (0.34)
1.77
(0.07)
10
7
9
8
10.16
13.7 (0.54)
Pin-Out
Pin
Single
Dual
1 –Vin (GND) –Vin (GND)
7
No con.
No con.
8
No con. Common
9
+Vout
+Vout
10
–Vout
–Vout
16
+Vin
+Vin
Dimensions in [mm], () = Inch
Pin diameter: 0.5 ±0.05 (0.024 ±0.002)
Tolerances: ±0.25 (±0.01)
Pin pitch tolerances: ±0.05 (±0.002)
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Rev. July 8. 2013
Page 3 of 3