TML Datasheet, PDF (2/5 Pages) Touchstone Semiconductor Inc – AC/DC Power Modules

AC/DC Power Modules
TML Series
20 & 40 Watt
40 Watt Models
Order code
PCB mount
Chassis mount
TML 40103
TML 40105
TML 40112
TML 40115
TML 40124
TML 40205
TML 40212
TML 40215
TML 40252
TML 40254
TML 40512
TML 40515
TML 40103C
TML 40105C
TML 40112C
TML 40115C
TML 40124C
TML 40205C
TML 40212C
TML 40215C
TML 40252C
TML 40254C
TML 40512C
TML 40515C
Output
power
max.
Output 1
26.4 W 3.3 VDC/8000 mA
5.0 VDC/8000 mA
12 VDC/3333 mA
15 VDC/2666 mA
24 VDC/1667 mA
40 W
+5.0 VDC/4000 mA
+12 VDC/1666 mA
+15 VDC/1333 mA
*5.0 VDC/5000 mA
*5.0 VDC/5000 mA
*5.0 VDC/5000 mA
*5.0 VDC/5000 mA
* Output floating
Output 2
–5.0 VDC/4000 mA
–12 VDC/1666 mA
–15 VDC/1333 mA
*12 VDC/1250 mA
*24 VDC/625 mA
+12 VDC/600 mA
+15 VDC/500 mA
Output 3
–12 VDC/600 mA
–15 VDC/500 mA
Input Specifications
Input voltage ranges
– AC input 90 – 264 VAC
– DC Input 100 – 375 VDC
Input frequency 47 – 440 Hz
Input current at full load (115 VAC / 230 VAC nominal input)
TML 20 models: 400 mA / 270 mA typ.
TML 40 models: 860 mA / 460 mA typ
Leakage current 0.75 mA max.
External fuse (required) 1.5 A slow blow type (recommendation)
Output Specifications
Voltage set accuracy
TML 20 models: ±2 %
TML 40 single and symetric dual output models: ±2 %
TML 40 asymetric dual and triple output models: ±3 % for output 1, ±5 % for output 2&3
Minimum load
TML 20 single and dual output models: 0 %
TML 20 triple output models: 10 % (each output)
TML 40 single output models: 1 %
TML 40 symetric dual output models: 10 % (each output)
TML 40 asymetric dual and triple output models: 25 % (each output)
operation at lower load condition will not
damage these power supplies, how­e­ ver, they
may not meet all listed specifications.
Ripple and noise (20 MHz bandwidth)
TML 20 models: <0.7 % of Vout +90 mV [Vp-p]
TML 40, 3.3 VDC model: <50 mVp-p
TML 40 other models: <1 % of Vout [Vp-p]
Regulation – Input variation
single and symetric dual output models: 0.5 % (each output)
TML 20 triple output models: 1 % for output 1, 5 % for output 2&3
TML 40 asymetric dual and triple output models: ±0.5 % for output 1, ±5 % for output 2&3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 5