TS1005DB Datasheet, PDF (1/5 Pages) Touchstone Semiconductor Inc – TS1005 Op Amp Demo Board

TS1005 Op Amp Demo Board
FEATURES
 0.8V to 5.5V Single-supply operation
 AC-coupled Inverting configuration supplied
 Fully Assembled and Tested
 2mm x 2mm 2-layer demo board
COMPONENT LIST
DESIGNATION QTY
C1, C2, C3, C5
4
C4, C6
2
R2
1
R7
1
R5, R6, R10
3
R8, R9
2
R1, R3, R4
3
U1, U2
2
VDD ,Vin ,Vout ,GND 11
DESCRIPTION
0.1µF ± 10%
capacitors (0805)
1µF ±10%
capacitors (0805)
665kΩ ± 1%
resistor (0805)
500kΩ ± 1%
resistor (0805)
1MΩ ± 1%
resistors (0805)
1.25MΩ ± 1%
resistors (0805)
2MΩ ± 1%
resistors (0805)
TS1005
operational
amplifiers
Test points
DESCRIPTION
The demo board for the TS1005 is a completely
assembled and tested circuit board that can be used
for evaluating the TS1005. The TS1005 is a precision
CMOS operational amplifier fully specified to operate
over a supply voltage range from 0.8V to 5.5V with a
GBWP of 20kHz. Fully specified at 1.8V, the TS1005
is optimized for ultra-long-life battery powered
applications. The TS1005 exhibits a typical input bias
current of 2pA, and rail-to-rail input and output
stages.
The TS1005 is fully specified over the industrial
temperature range (-40°C to +85°C). The TS1005
evaluation board is offered with either a PCB-space
saving 5-lead SC70 or 5-lead SOT23 packaging.
Product data sheets and additional documentation
can be found on factory web site at
www.touchstonesemi.com.
Ordering Information
Order Number
TS1005DB
TS1005DB-SOT
Description
SC70 Packaging
Demo Board
SOT23 Packaging
Demo Board
Figure 1. Inverting Configuration
Figure 2. TS1005-SOT
Evaluation Board
Page 1
© 2013 Touchstone Semiconductor, Inc. All rights reserved.