TS1002 Datasheet, PDF (1/13 Pages) Touchstone Semiconductor Inc – THE ONLY 0.8V/0.6uA RAIL-TO-RAIL DUAL/QUAD OP AMPS

TS1002/TS1004
THE ONLY 0.8V/0.6µA RAIL-TO-RAIL DUAL/QUAD OP AMPS
FEATURES
Single 0.65V to 2.5V Operation
Supply current: 0.6μA per amplifier (typ)
Offset voltage: 0.5mV (typ)
Low TCV_OS: 10µV/°C (typ)
A_VOL Driving 100kΩ Load: 90dB (min)
Unity Gain Stable
Rail-to-rail Input and Output
No Output Phase Reversal
Packaging: TS1002 – 8-pin MSOP
TS1004 – 14-pin TSSOP
APPLICATIONS
Battery/Solar-Powered Instrumentation
Portable Gas Monitors
Low-voltage Signal Processing
Nanopower Active Filters
Wireless Remote Sensors
Battery-powered Industrial Sensors
Active RFID Readers
Powerline or Battery Current Sensing
Handheld/Portable POS Terminals
DESCRIPTION
The TS1002 and the TS1004 are the industry’s first
and only dual and quad single-supply, precision
CMOS operational amplifiers fully specified to operate
at 0.8V while consuming less than 0.6µA supply
current per amplifier. Optimized for ultra-long-life
battery-powered applications, the TS1002 and the
TS1004 join Touchstone’s TS1001 operational
amplifier in the “NanoWatt Analog™” high-
performance analog integrated circuits portfolio. Both
op amps exhibit a typical offset voltage of 0.5mV, a
typical input bias current of 25pA, and rail-to-rail input
and output stages. The TS1002 and the TS1004 can
operate from single-supply voltages from 0.65V to
2.5V.
The TS1002/TS1004’s combined features make
either an excellent choice in applications where very
low supply current and low operating supply voltage
translate into very long equipment operating time.
Applications include: nanopower active filters,
wireless remote sensors, battery and powerline
current sensors, portable gas monitors, and
handheld/portable POS terminals.
The TS1002 and the TS1004 are fully specified at
VDD = 0.8V and over the industrial temperature
range (−40°C to +85°C). The TS1002 is available in
PCB-space saving 8-lead MSOP surface-mount
packages. The TS1004 is available in a 14-pin
TSSOP package.
TYPICAL APPLICATION CIRCUIT
30%
25%
Supply Current Distribution
VDD = 0.8V
20%
15%
10%
A NanoWatt 2-Pole Sallen-Key Low-Pass Filter
Patent(s) Pending
NanoWatt Analog and the Touchstone Semiconductor logo are registered
trademarks of Touchstone Semiconductor, Incorporated.
5%
0%
0.53 0.58 0.63 0.68 0.73
Supply Current per Amplifier - µA
Page 1
© 2012 Touchstone Semiconductor, Inc. All rights reserved.