MSIW1000 Datasheet, PDF (3/4 Pages) Minmax Technology Co., Ltd. – 3W, Wide Input Range SMD, Single & Dual Output DC/DC Converters

Total Power International, Inc.
Power Derating Curve
MSIW1000 SERIES
DC/DC CONVERTER 3W, SMD-Package
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%
3 Ripple & Noise measurement bandwidth is 0-20MHz.
4 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;
however they may not meet all specifications listed.
5 All DC/DC converters should be externally fused at the front end for protection.
6 Other input and output voltage may be available, please contact factory.
7 That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
8 Specifications subject to change without notice.
9 It is not recommended to use water-washing process on SMT units.
Package Specifications
Mechanical Dimensions
32.3 [1.27]
2.18
5.08 17.78 [0.7] 5.08
[0.09]
[0.2]
[0.2]
24 23 22
15 14 13
123
0.50 [0.02]
10 11 12
Connecting Pin Patterns
27.94 [1.10]
20.0 [0.79]
2.6 [0.10]
2.54 [0.10]
17.78 [0.70]
1.0 [0.04]
Pin Connections
Pin
1,2
3,11,14,22
10
12
13
15
23,24
Single Output
-Vin
NC
NC
NC
+Vout
-Vout
+Vin
Dual Output
-Vin
NC
Common
-Vout
+Vout
Common
+Vin
NC : No Connection
S SEATING
PLANE
0.15 S
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pins ±0.05 (±0.002)
Physical Characteristics
Case Size
: 32.3x14.8x10.2mm (1.27x0.58x0.4 Inches)
Case Material
: Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Weight
: 8.8g
Total Power International, Inc
Toll Free: 877-646-0900
www.total-power.com