MKW10M Datasheet, PDF (3/4 Pages) Minmax Technology Co., Ltd. – DC/DC CONVERTER 10W, Reinforced Insulation, Medical Safety

Total
Power
International,
Inc._DC/DC
CONVERTER
10W,
MKW10M SERIES
Reinforced Insulation, Medical Safety
Power Derating Curve
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%.
3 Ripple & Noise measurement bandwidth is 0-20MHz.
4 All DC/DC converters should be externally fused at the front end for protection.
5 Other input and output voltage may be available, please contact factory.
6 That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
7 Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
5.08
[0.20]
21
5.08
[0.20]
12.0
[0.47]
Pin Connections
Pin
Single Output
1
+Vin
2
-Vin
3
+Vout
4
No Pin
5
-Vout
Dual Output
+Vin
-Vin
+Vout
Common
-Vout
Bottom View
5
4
3
10.16
[0.40]
10.16
[0.40]
25.4 [1.00]
2.54
[0.10]
Physical Characteristics
Case Size
: 50.8x25.4x12.0mm (2.0x1.0x0.47 inches)
Case Material
: Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Pin Material
: Copper Alloy with Gold Plate Over Nickel Subplate
Weight
: 24.5g
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pin diameter — 1.0 ±0.05 (0.04±0.002)
Total Power International, Inc
Toll Free: 877-646-0900
www.total-power.com