MDWI03 Datasheet, PDF (3/4 Pages) Minmax Technology Co., Ltd. – DC/DC CONVERTER 3W, DIP-Package Ultra compact DIP-Package

Total Power International, Inc.
Power Derating Curve
MDWI03 SERIES
DC/DC CONVERTER 3W, DIP Package
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%
3 Ripple & Noise measurement bandwidth is 0-20MHz.
4 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;
however, they may not meet all specifications listed.
5 All DC/DC converters should be externally fused at the front end for protection.
6 Other input and output voltage may be available, please contact factory.
7 That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
8 Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
23.8 [0.94]
0.5 [0.02]
0.5 [0.02]
Pin Connections
Pin
Single Output
1
-Vin
2
Remote On/Off
7
NC
8
NC
9
+Vout
10
-Vout
16
+Vin
Dual Output
-Vin
Remote On/Off
NC
Common
+Vout
-Vout
+Vin
3.0
[0.12]
2.54
[0.10]
12.7
[0.50]
2.54
[0.10]
NC: No Connection
12
78
Bottom View
16
10 9
15.24 [0.60]
23.8 [0.94]
2.54
[0.10]
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pin diameter  0.5 ±0.05 (0.02±0.002)
Physical Characteristics
Case Size
: 23.8x13.7x8.0 mm (0.94x0.54x0.31 inches)
Case Material
: Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Pin Material
: phosphor bronze
Weight
: 5.4g
Total Power International, Inc
Toll Free: 877-646-0900
www.total-power.com