TPSPU80 Datasheet, PDF (1/2 Pages) Total Power International – 80W Desk Top Seitching Power Supplies For I.T.E.

TPSPU80 SERIES
80W Desk Top Switching Power Supplies For I.T.E.
Description:
The 80 series of AC/DC switching mode power supplies
provide 80 Watts of continuous output power. All supplies are
UL 94V-1 min compliant, include IEC-320-C14 input for
worldwide applications. All models meet FCC Part-15 class B
and CISPR-22 class B emission Limits and are designed to
comply with UL/c-UL(UL 60950-1), TUV/GS(EN 60950-1) and
new CE requirements. All units are 100% burned in and tested.
Features:
Wide Input Voltage 90 to 264 VAC,47 to 63 Hz
IEC-320-C14 Input Inlet
Single Output
Output Voltage Available From 11VDC Thru 48VDC
Optional Output Connector (See appendix)
Input Surge Current, Over Voltage And Over Load protection
Power Factor Correction
Output Voltage Protection(Crowbar Design)
Splash proof
Class I
2 year warranty
Electrical Characteristics:
Safety Approvals :
CB
Sym.
Parameter
Test Conditions
Min. Typ. Max. Unit
Vin Input Voltage
Operating Voltage
90
264 VAC
fin Input Frequency
47
63 Hz
PF Power Factor Correction
Io=Full load, Vin=90~260VAC
0.95 0.97 1.0
Po Output Power Range
Vin=90 to 264 VAC
0
80
W
Vo Output Voltage Range
See rating Chart V
Io Output Current Range
See rating Chart A
Iil Input Current (Low Line) Io=Full load, Vin=115VAC
1.07 A
Iih
I rl
I rh
Eff
Input Current (High Line)
Low Line Inrush Current
High Line Inrush Current
Efficiency
Io=Full load, Vin=230VAC
Io=Full load, 25 C,Cool start,
Vin=115VAC
Io=Full load, 25 C,Cool start,
Vin=230VAC
Io=Full load, Vin=230VAC
0.5 A
12 15 A
26 30 A
80 83 88 %
REG-i Line Regulation
Io=Full load
0.5 1
%
REG -o Load Regulation
Vin=230VAC
3
7
%
OVP Over Voltage Protection
112
132 %
OCP Over Current Protection
110
150 %
Ttr Time of Transient Response Io=Full load to Half Load, Vin=100VAC
4
mS
Thold Hold-Up Time
Io=Full load, Vin=110VAC
16
mS
Ts ^{Start Up Time}
Io=Full load, Vin=100VAC
0.3 1 2
S
Vp-p Ripple & Noise (Peak to Peak) Full load, Vin=90VAC
0.5 1
%
Ilk Safety Ground Leakage Current Io=Full load, Vin=240VAC
0.5 0.75 mA
TC Temperature Coefficient All output
-0.04
0.04 %/ C
Environmental :
Sym.
Parameter
T e s t Conditions
Toper Operating Temperature
Tstg Storage Temperature
Hr Relative Humidity
MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F
Pd Derate linearly from 100% load at 40 C to 50% load at 70 C
Min. Typ. Max. Unit
0
70
C
-40
85
C
5
95 %
0.1
M Hrs
Total Power International, Inc. Toll Free: 877-646-0900(US) www.total-power.com