TPIPU63 Datasheet, PDF (1/2 Pages) Total Power International – 63W desk top switching power supplies for industrial equipment

TPIPU63 SERIES
63W Desk Top Switching Power Supplies For Industrial Equipment
Description:
The 63 series of AC/DC switching mode power supplies
provide 63Watts of continuous output power and is well-suited
for a variety of applications. All supplies are UL 94V-1 min
compliant. All models meet FCC Part-15 class B and CISPR-22
class B emission Limits and are designed to comply with UL/c-
UL(UL 60950-1), TUV/GS(EN 60950-1) and new CE
requirements. All units are 100% burned in and tested.
Features:
Wide Input Voltage 90 to 264 VAC,47 to 63 Hz
IEC-320-C14 Input Inlet
Single output
Optional Output Connector (See appendix)
Over Voltage Protection (Crowbar Design)
Splash proof
Class I
Altitude : 0 - 10,000 feet
CEC and Energy Star compliance
Approved as Limited Power Source (LPS).
Operating temperature -20~70 ^C
2 year warranty
Electrical Characteristics:
Safety Approvals :
CB
PS
E
Sym.
Parameter
Test Conditions
Min. Typ. Max. Unit
Vin Input Voltage
Operating Voltage
90
264 VAC
fin Input Frequency
47
63 Hz
Po Output Power Range
Vin=90 to 264VAC
0
63
W
Vo Output Voltage Range
Io Output Current Range
See rating chart V
See rating chart A
Iil Input Current (Low Line)
Io=Full load, Vin=115VAC
1.6 A
Iih Input Current (High Line)
Io=Full load, Vin=230VAC
0.7 A
Irl Low Line Inrush Current
Irh High Line Inrush Current
Eff Efficiency
Io=Full load, 25c, Cool start,
Vi n=115VA C
27 30
A
Io=Full load, 25c, Cool start,
Vi n=230VA C
47 50
A
Io=Full Load, Vin=230VAC
84 88 91
%
REG-i Line Regulation
Io=Full Load
0.5 1
%
REG-o Load Regulation
Vi n=230VA C
35
%
OVP Over Voltage Protection
112
132 %
OCP Over Current Protection
102
150 %
Ttr Time of Transient Response Io =Full Load to Half Load, Vin=100VAC
4
mS
Thold Hold-Up Time
Io=Full Load, Vin=110VAC
16
mS
Ts Start Up Time
Io=Full Load, Vin=100VAC
0.3 1 2
S
Vrn Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC
0.5 1
%
Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC
TC Temperature Coefficient
All output
Pno No-Load Power Consumption
No load, Vin=240VAC
0.5 0.75
-0.04
0.04
0.1
0.5
mA
%/c
W
Environmental :
Sym.
Parameter
T e s t Conditions
Toper Operating Temperature
Tstg Storage Temperature
Hr Relative Humidity
MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F
Pd Derate linearly from 100% load at 40 C to 50% load at 70 C
Min. Typ. Max. Unit
-20
-40
5
0.13M
70
C
85
C
95
%
Hrs
Total Power International, Inc.
Toll Free: 877-646-0900
www.total-power.com