TPIPU25A Datasheet, PDF (1/2 Pages) Total Power International – 25W desk top switching power supplies for industrial equipment

TPIPU25A SERIES
25W Desk Top Switching Power Supplies For Industrial Equipment
Description:
The 25A series of AC/DC switching mode power
supplies provide 25 Watts of continuous output power and
is well-suited for a variety of applications. All supplies are
UL 94V-1 min compliant. All model meet FCC Part-15 class
B and CISPR-22 class B emission Limits and are designed
to comply with UL/c-UL(UL 60950-1), TUV/GS(EN 60950-1)
and new CE requirements. All units are 100% burned-in
and tested.
Features:
Wide Input Voltage 90 to 264 VAC,47 to 63 Hz
IEC-320-C14 Input Inlet
Output Voltage Available From 5VDC Thru 48VDC
Optional Output Connector (See appendix)
Single Output
Splash proof
Class I
Approved as Limited Power Source (LPS).
Operating temperature -20~70 C
2 year warranty
Electrical Characteristics:
Safety Approvals:
CB
PS
E
Sym.
Parameter
Test Conditions
Min. Typ. Max. Unit
Vin Input Voltage
Operating Voltage
90
264 VAC
fin Input Frequency
47
63 Hz
Po Output Power Range
Vin=90 to 264VAC
0
25
W
Vo Output Voltage Range
See rating chart V
Io Output Current Range
See rating chart A
Iil Input Current (Low Line)
Io=Full load, Vin=115VAC
0.4 A
Iih Input Current (High Line)
Io=Full load, Vin=230VAC
0.25 A
Irl Low Line Inrush Current
Io=Full load, 25c, Cool start,
Vin=115VAC
12 15
A
Irh High Line Inrush Current
Io=Full load, 25c, Cool start,
Vin=230VAC
26 30
A
Eff Efficiency
Io=Full Load, Vin=230VAC
75 85 95
%
REG-i Line Regulation
Io=Full Load
0.5 1
%
REG-o Load Regulation
Vin=230VAC
135
%
OVP Over Voltage Protection
Nil
%
OCP Over Current Protection
110
150 %
Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC
4
mS
Thold Hold-Up Time
Io=Full Load, Vin=110VAC
12 14 16 mS
Ts Start Up Time
Io=Full Load, Vin=100VAC
0.25 0.5 S
Vrn Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC
0.5 1
%
Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC
0.5 0.75 mA
TC Temperature Coefficient
All output
-0.04
0.04 %/c
Pno No-Load Power Consumption
No load, Vin=240VAC
0 0.4 0.5 W
Environmental :
Sym.
Parameter
T e s t Conditions
Toper Operating Temperature
Tstg Storage Temperature
Hr Relative Humidity
MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F
Pd
Derate linearly from 100% load at 40 C to 50% load at 70 C
Min. Typ. Max. Unit
-20
70
C
-40
85
C
5
95 %
0.3M
Hrs
Total Power International, Inc. Toll Free: 877-646-0900(US) www.total-power.com