S-60 Datasheet, PDF (1/2 Pages) Total Power International – 60W Single Output Switching Power Supply

TOTAL POWER INT'L
60W Single Output Switching Power Supply
S-60 series
Features :
Universal AC input/Full range
Protections:Short circuit/Over load/Over voltage
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 50KHz
2 years warranty
SPECIFICATION
MODEL
S-60-5
S-60-12
S-60-15
S-60-24
OUTPUT
DC VOLTAGE
5V
RATED CURRENT
12A
CURRENT RANGE
0 ~ 12A
RATED POWER
60W
RIPPLE & NOISE (max.) Note.2 120mVp-p
VOLTAGE ADJ. RANGE
4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3 2.0%
LINE REGULATION
0.5%
LOAD REGULATION
1.0%
SETUP, RISE, HOLD TIME 300ms, 50ms, 80ms / 230VAC
12V
15V
5A
4A
0 ~ 5A
0 ~ 4A
60W
60W
120mVp-p
150mVp-p
10.8 ~ 13.2V
13.5 ~ 16.5V
1.0%
1.0%
0.5%
0.5%
0.5%
0.5%
800ms, 50ms, 10ms / 115VAC at full load
24V
2.5A
0 ~ 2.5A
60W
150mVp-p
21.6 ~ 26.4V
1.0%
0.5%
0.5%
VOLTAGE RANGE
85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY(Typ.)
73%
76%
77%
79%
AC CURRENT
2A/115VAC 1A/230VAC
INRUSH CURRENT(max.) COLD START 30A/115VAC 60A/230VAC
LEAKAGE CURRENT
<3.5mA / 240VAC
OVER LOAD
PROTECTION
OVER VOLTAGE
105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
27.6 ~ 32.4V
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
-10 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL1012, UL1950, TUV EN60950 Approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMC
(Note 4)
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
OTHERS
NOTE
MTBF
316.2K hrs min. MIL-HDBK-217F (25 )
DIMENSION
159*97*38mm (L*W*H)
PACKING
0.51Kg; 24pcs/13.1Kg/0.7CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.