RS-15 Datasheet, PDF (1/2 Pages) Mean Well Enterprises Co., Ltd. – 15W Single Output Switching Power Supply

Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# [phone] www.total-power.com
15W Single Output Switching Power Supply
RS-15 series
■ Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105℃ long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70℃
Withstand 5G vibration test
High efficiency, long life and high reliability
SPECIFICATION
3 years warranty
..
MODEL
RS-15-3.3
RS-15-5
RS-15-12
RS-15-15
RS-15-24
RS-15-48
DC VOLTAGE
3.3V
5V
12V
15V
24V
48V
RATED CURRENT
3A
3A
1.3A
1A
0.625A
0.313A
CURRENT RANGE
0 ~ 3A
0 ~ 3A
0 ~ 1.3A
0 ~ 1A
0 ~ 0.625A
0 ~ 0.313A
RATED POWER
9.9W
15W
15.6W
15W
15W
15W
OUTPUT
RIPPLE & NOISE (max.) Note.2 80mVp-p
80mVp-p
120mVp-p
120mVp-p
VOLTAGE ADJ. RANGE
2.9 ~ 3.6V
4.75 ~ 5.5V
10.8 ~ 13.2V
13.5 ~ 16.5V
VOLTAGE TOLERANCE Note.3 ± 3.0%
± 2.0%
± 1.0%
± 1.0%
LINE REGULATION Note.4 ± 0.5%
± 0.5%
± 0.5%
± 0.5%
LOAD REGULATION Note.5 ± 2.0%
± 1.5%
± 0.5%
± 0.5%
SETUP, RISE TIME
1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load
200mVp-p
22 ~ 27.6V
± 1.0%
± 0.5%
± 0.5%
200mVp-p
43.2 ~ 52.8V
± 1.0%
± 0.5%
± 0.5%
HOLD UP TIME (Typ.)
70ms/230VAC 15ms/115VAC at full load
VOLTAGE RANGE
85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY (Typ.)
72%
77%
81%
81%
82%
82%
AC CURRENT (Typ.)
0.35A/115VAC 0.25A/230VAC
INRUSH CURRENT (Typ.) COLD START 65A / 230VAC
LEAKAGE CURRENT
<2mA / 240VAC
OVERLOAD
Above 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
3.8 ~ 4.45V
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
Protection type : Shut off o/p voltage, clamping by zener diode
28.4 ~ 32.4V
55.2 ~ 64.8V
OVER TEMPERATURE
U1 Tj 140℃ typically (U1) detect on main control IC
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
-20 ~ +70℃ (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
± 0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL60950-1, TUV EN60950-1 approved
SAFETY &
EMC
(Note 6)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 25℃ 70%RH
Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, light industry level, criteria A
MTBF
1608.8Khrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION
62.5*51*28mm (L*W*H)
PACKING
0.13Kg; 108pcs/15Kg/0.71CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.