HES06B Datasheet, PDF (1/2 Pages) Total Power International – AC TO DC EXTERNAL WALLMOUNT ADAPTER 2-BLADE USA OR JAPAN AC PLUG SINGLE OUTPUT 6 WATTS SWITCHING POWER SUPPLIES HES06B SERIES

H HiTRON
10/17/2002
AC TO DC EXTERNAL WALLMOUNT ADAPTER 2-BLADE USA OR
JAPAN AC PLUG SINGLE OUTPUT 6 WATTS SWITCHING
POWER SUPPLIES HES06B SERIES
FEATURES:
STORAGE TYPE AC PLUG & OCCUPY ONE
RECEPTACLE POSITION ONLY.
SMALL & COMPACT IN SIZE
EMI MEET CISPR-B/VCCI CLASS 2/FCC
CLASS B
MEET JAPAN, USA SAFETY STANDARD
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Typ. 90-132Vac.
Input Connector: 2-blade USA /Japan AC plug storage
WM1 type.
Input Frequency: 50/60Hz.
Inrush Current: Typ.17.6A @115Vac.
Input Current: 0.12A @115Vac.
Dielectric Withstand: Meet UL60950.
EMI: Meet CISPR-B/VCCI CLASS 2/FCC Class B.
Hold-up Time: Typ.26mS @115Vac.
OUTPUT SPECIFICATION
Output Voltage: See Rating Chart.
Output Current: See Rating Chart.
Output Wattage: 6 Watts Max.
Output Connector: Optional.
Line Regulation: Typ. 0.1%.
Load Regulation: Typ. ±2-3% Max.
Noise & Ripple: Typ. 1% peak to peak.
OVP: Built-in Zener Diode clamping.
Adjustability: Factory set.
Overload Protection: Built-in.
GENERAL SPECIFICATION
Efficiency: Typ. 76%. (Various with output voltage)
Operating Temperature: 0 ~ +40°C.
Switching Frequency: About 80KHz.
Circuit Topology: Free Running Flyback Circuit.
Transient Response: Output voltage returns in less than
10mS following a 25% load change.
Safety Standard: UL60950/PSE.Class II.
Storage Temperature: -20 to +85°C.
Temperature Coefficient: 0.04%/°C.
Cooling: Free air convection.
Construction: Impact resistant plastic enclosure case
Power Density: 1.89Watts/cubic inch.
wallmount format.
Notes: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.
(2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (±%).
(3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires.
In application