TC74VCXH162374FT Datasheet, PDF (7/14 Pages) Toshiba Semiconductor – Low-Voltage 16-Bit D-Type Flip-Flop with Bushold

DC Characteristics (Ta = −40 to 85°C, 2.3 V _=< V_{CC =<} 2.7 V)
TC74VCXH162374FT
Characteristics
Input voltage
H-level
L-level
Symbol
V_IH
V_IL
Test Condition
⎯
⎯
Min Max Unit
V_CC (V)
2.3 to 2.7 1.6
⎯
V
2.3 to 2.7 ⎯
0.7
I_OH = −100 μA
2.3 to 2.7
V_CC
− 0.2
⎯
Output voltage
H-level
V_OH V_IN = V_IH or V_IL
L-level
V_OL V_IN = V_IH or V_IL
Input leakage
current
( OE , CK)
(An)
V_IN = 0 to 3.6 V
I_IN
V_IN = V_CC or GND
Bushold input minimum drive
hold current
V_IN = 0.7 V
I_{I (HOLD)}
V_IN = 1.6 V
Bushold input over-drive current
to change state
I_{I (OD)}
I_OH = −4 mA
I_OH = −6 mA
I_OH = −8 mA
I_OL = 100 μA
I_OL = 6 mA
I_OL = 8 mA
2.3
2.0
⎯
2.3
1.8
⎯
2.3
1.7
⎯
V
2.3 to 2.7 ⎯
0.2
2.3
⎯
0.4
2.3
⎯
0.6
2.3 to 2.7 ⎯ ±5.0
μA
2.3 to 2.7 ⎯ ±5.0
2.3
45
⎯
μA
2.3
−45 ⎯
(Note 1) 2.7
(Note 2) 2.7
⎯
300
μA
⎯ −300
3-state output OFF state current
Power-off leakage current
Quiescent supply current
I_OZ
I_OFF
I_CC
V_IN = V_IH or V_IL
V_OUT = 0 to 3.6 V
V_OUT = 0 to 3.6 V
V_IN = V_CC or GND
V_CC ^<= V_OUT ^<= 3.6 V
2.3 to 2.7 ⎯ ±10.0 μA
0
⎯ 10.0 μA
2.3 to 2.7 ⎯ 20.0
μA
(Note 3) 2.3 to 2.7 ⎯ ±20.0
Note 1: An external driver must source at least the specified current to switch LOW-to-HIGH.
Note 2: An external driver must sink at least the specified current to switch HIGH-to-LOW.
Note 3: Outputs high impedance only.
7
2007-10-19