TORX176 Datasheet, PDF (6/7 Pages) Toshiba Semiconductor – FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO EQUIPMENT

TORX176
(10) Supply voltage
Use the supply voltage within the Typ. operating condition (VCC = 5 ± 0.25 V). Make sure that supply
voltage does not exceed the maximum rating value of 7 V, even instantaneously.
(11) Interface
TORX176 has a TTL interface. It can be interfaced with C−MOS IC that has compatibility with TTL
level.
(12) Output
When the receiver output is at low level and connected to the power supply, or when the output is at
high level and connected to GND, the internal IC may be destroyed.
(13) Soldering Condition
Solder at 260°C or less within ten seconds.
(14) Precaution on waste
When discarding devices and packing materials, follow procedures stipulated by local regulations in
order to protect the environment against contamination.
(15) Precaution on use
Toshiba is continually working to improve the quality and the reliability of its products. Nevertheless,
semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity
and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing Toshiba
products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a
Toshiba product could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that Toshiba products are used within specified operating
ranges as set forth in the most recent product specifications. Also, please keep in mind the
precautions and conditions set forth in the Toshiba Semiconductor Reliability Handbook.
6
2001-08-10