TLCBK1100B Datasheet, PDF (6/9 Pages) Toshiba Semiconductor – Panel Circuit Indicator

TLCBK1100B(T11)
Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents.
It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the
recommended conditions). In selecting the one for your actual usage, please perform sufficient review
on washing condition, using condition and etc.
ASAHI CLEAN AK-225AES
KAO CLEAN THROUGH 750H
PINE ALPHA ST-100S
: (made by ASAHI GLASS)
: (made by KAO)
: (made by ARAKAWA CHEMICAL)
Precautions when Mounting
Do not apply force to the plastic part of the LED under high-temperature conditions.
To avoid damaging the LED plastic, do not apply friction using a hard material.
When installing the PCB in a product, ensure that the device does not come into contact with other cmponents.
Tape Specifications
1. Product number format
The type of package used for shipment is denoted by a symbol suffix after the product number. The
method of classification is as below. (this method, however does not apply to products whose electrical
characteristics differ from standard Toshiba specifications)
(1) Tape Type: T11 (4-mm pitch)
(2) Example
TLCBK1100B (T11)
Tape type
Toshiba product No.
2. Tape dimensions
Symbol
D
E
P₀
t
F
D₁
Dimension
1.5
1.75
4.0
0.3
3.5
1.5
Tolerance
+0.1/−0
±0.1
±0.1
±0.05
±0.05
±0.1
Symbol
P₂
W
P
A₀
B₀
K₀
Dimension
2.0
8.0
4.0
2.9
3.7
2.3
Tolerance
±0.05
±0.3
±0.1
±0.1
±0.1
±0.1
P₀
D
P₂
P
A₀
K₀
t
E
FW
D₁
B₀
Polarity
6
2009-04-28