English
Language : 

TLP2962 Datasheet, PDF (5/13 Pages) Toshiba Semiconductor – Photocouplers GaAAs Infrared LED & Photo IC
TLP2962
11. Switching Characteristics (Note)
(Unless otherwise specified, Ta = -40 to 125 , VCC = 2.7 to 5.5 V)
Characteristics
Propagation delay time
(H/L)
Propagation delay time
(L/H)
Pulse width distortion
Propagation delay skew
(device to device)
Fall time
Rise time
Common-mode transient
immunity at output high
Common-mode transient
immunity at output low
Symbol Note
tpHL (Note 1)
tpLH (Note 1)
|tpHL-
tpLH|
tpsk
tf
(Note 1)
(Note 1),
(Note 2)
(Note 1)
tr
(Note 1)
CMH
CML
Test
Circuit
Fig.
12.1.5
Fig.
12.1.6
Test Condition
IF = 0→7.5 mA, RL = 350 Ω,
CL = 15 pF
IF = 7.5→0 mA, RL = 350 Ω,
CL = 15 pF
IF = 7.5 mA, RL = 350 Ω,
CL = 15 pF
IF = 0 → 7.5 mA, RL = 350 Ω,
CL = 15 pF
IF = 7.5 → 0 mA, RL = 350 Ω,
CL = 15 pF
VCM = 1000 Vp-p, IF = 0 mA,
VCC = 3.3V / 5 V, Ta = 25 
VCM = 1000 Vp-p, IF = 10 mA,
VCC = 3.3V / 5 V, Ta = 25 
Min Typ. Max Unit

35
75
ns

25
75


35
-40

40

3


12

±20 ±25
 kV/µs
±20 ±25

Note: All typical values are at Ta = 25.
Note 1: f = 5 MHz, duty = 50%, input current tr = tf = 5 ns, CL is approximately 15 pF which includes probe and stray
wiring capacitance.
Note 2: The propagation delay skew, tpsk, is equal to the magnitude of the worst-case difference in tpHL and/or tpLH
that will be seen between units at the same given conditions (supply voltage, input current, temperature, etc).
5
2014-06-13
Rev.2.0