TPS855 Datasheet, PDF (4/8 Pages) Toshiba Semiconductor – Luminosity Adjustment for TV Screens, CRT Monitors and Liquid-crystal Display Monitors Other Equipment Requiring Luminosity Adjustment

TPS855(F)
Handling Precautions
At power-on in darkness, the internal circuit takes about 50 ms to stabilize. During this period the output
signal is unstable and may change. Please take this into account.
Mounting Precautions
(1) When forming the leads, bend each lead under the lead stopper. Soldering must be performed after
the leads have been formed.
(2) Soldering must be performed under the stopper.
(3) To stabileze the power line, insert a bypass capacitor of up to 0.01μF between VCC and GND, close to
the device.
4
2007-10-01