TPD4113K Datasheet, PDF (4/21 Pages) Toshiba Semiconductor – Intelligent Power Device High Voltage Monolithic Silicon Power IC

TENTATIVE
TPD4113K
Pin Description
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Symbol
HU
HV
HW
LU
LV
LW
IS1
NC
BSU
U
V_BB1
BSV
V
BSW
W
V_BB2
NC
IS2
RS
DIAG
V_CC
GND
V_REG
Pin Description
The control terminal of IGBT by the side of U top arm. It turns off more than by 1.5V.
It turns on more than by 3.5V.
The control terminal of IGBT by the side of V top arm. It turns off more than by 1.5V.
It turns on more than by 3.5V.
The control terminal of IGBT by the side of W top arm. It turns off more than by 1.5V.
It turns on more than by 3.5V.
The control terminal of IGBT by the side of U bottom arm. It turns off more than by 1.5V.
It turns on more than by 3.5V.
The control terminal of IGBT by the side of V bottom arm. It turns off more than by 1.5V.
It turns on more than by 3.5V.
The control terminal of IGBT by the side of W bottom arm. It turns off more than by 1.5V.
It turns on more than by 3.5V.
IGBT emitter and FRD anode pin. (Connect a current detecting resistor to this pin.)
Unused pin, which is not connected to the chip internally.
U-phase bootstrap capacitor connecting pin.
U-phase output pin.
U and V-phase high-voltage power supply input pin.
V-phase bootstrap capacitor connecting pin.
V-phase output pin.
W-phase bootstrap capacitor connecting pin.
-phase output pin.
W-phase high-voltage power supply input pin.
Unused pin, which is not connected to the chip internally.
IGBT emitter and FRD anode pin. (Connect a current detecting resistor to this pin.)
Over current detection pin.
With the diagnostic output terminal of open drain , a pull-up is carried out by resistance.
It turns it on at the time of unusual.
Control power supply pin.(15V typ.)
Ground pin.
7V regulator output pin.
4
2005-05-20