TMP93PS40 Datasheet, PDF (3/32 Pages) Toshiba Semiconductor – CMOS 16-Bit Microcontroller

TMP93PS40
Low Voltage/Low Power
CMOS 16-Bit Microcontrollers
TMP93PS40F
TMP93PS40DF
1. Outline and Device Characteristics
The TMP93PS40 is OTP type MCU which includes 64-Kbyte One-time PROM. Using the
adapter-socket (BM11109 or BM11129), you can write and verify the data for the TMP93PS40.
TMP93PS40 has the same pin-assignment with TMP93CM40/CS40 (Mask ROM type) .
Writing the program to Built-in PROM, the TMP93PS40 operates as the same way as the
TMP93CS40.
There is a difference in ROM capacity between TMP93PS40 (64 Kbytes) and the TMP93CM40
(32 Kbytes). Please pay attention to the difference of memory maps.
MCU
TMP93PS40F
TMP93PS40DF
ROM
OTP 64 Kbytes
RAM
2 Kbytes
Package
P-QFP100-1414-0.50
P-LQFP100-1414-0.50F
Adapter Socket
BM11109
BM11129
030619EBP1
• The information contained herein is subject to change without notice.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of TOSHIBA or others.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer,
when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid
situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to
property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most
recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for
Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made
at the customer’s own risk.
• The products described in this document are subject to the foreign exchange and foreign trade laws.
• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law
and regulations.
• For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality
and Reliability Assurance/Handling Precautions.
93PS40-1
2004-02-10