TLP172AM Datasheet, PDF (3/6 Pages) Toshiba Semiconductor – Photocouplers Photorelay

TLP172AM
6. Absolute Maximum Ratings (Note) (Unless otherwise specified, T_a = 25)
Characteristics
Symbol Note
Rating
Unit
LED Input forward current
Input forward current derating
(T_a ≥ 25 )
I_F
∆I_F/∆T_a
30
mA
-0.3
mA/
Input forward current (pulsed)
(100 µs pulse, 100 pps)
I_FP
1
A
Input reverse voltage
Input power dissipation
V_R
6
V
P_D
50
mW
Junction temperature
T_j
125

Detector OFF-state output terminal voltage
ON-state current
V_OFF
I_ON
60
V
500
mA
ON-state current derating
(T_a ≥ 25 )
∆I_ON/∆T_a
-5.0
mA/
ON-state current (pulsed)
(t = 100 ms, Duty = 1/10)
I_ONP
1.5
A
Output power dissipation
Junction temperature
P_O
300
mW
T_j
125

Common Storage temperature
T_stg
-55 to 125
Operating temperature
Lead soldering temperature
T_opr
(10 s)
T_sol
-40 to 110
260
Isolation voltage
AC, 60 s, R.H. ≤ 60 %
BV_S (Note 1)
3750
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: This device is considered as a two-terminal device: Pins 1 and 3 are shorted together, and pins 4 and 6 are
shorted together.
7. Recommended Operating Conditions (Note)
Characteristics
Symbol Note Min Typ. Max Unit
Supply voltage
V_DD


48
V
Input forward current
I_F
5
7.5
25
mA
ON-state current
I_ON


500
Operating temperature
T_opr
-20

100

Note: The recommended operating conditions are given as a design guide necessary to obtain the intended
performance of the device. Each parameter is an independent value. When creating a system design using
this device, the electrical characteristics specified in this datasheet should also be considered.
8. Electrical Characteristics (Unless otherwise specified, T_a = 25)
Characteristics
LED Input forward voltage
Input reverse current
Input capacitance
Detector OFF-state current
Output capacitance
Symbol
V_F
I_R
C_t
I_OFF
C_OFF
Note
Test Condition
I_F = 10 mA
V_R = 5 V
V = 0 V, f = 1 MHz
V_OFF = 60 V
V = 0 V, f = 1 MHz
Min Typ. Max Unit
1.1 1.27 1.4
V


10
µA

30

pF
 0.0001 1
µA

130

pF
©2016 Toshiba Corporation
3
2016-04-22
Rev.1.0