TLCBD1100B Datasheet, PDF (3/9 Pages) Toshiba Semiconductor – LED Lamps

TLCBD1100B(T11)
Note 4: Caution
ESD withstand voltage according to MIL STD 883D, Method 3015.7: ≥1000 V
When handling this LED, take the following measures to prevent the LED from being damaged or otherwise
adversely affected.
1) Use a conductive tablemat and conductive floor mat, and ground the workbench and floor.
2) Operators handling this LED must be grounded via a high resistance (about 1 MΩ). A conductive strap is
good for this purpose.
3) Ground all tools including soldering irons.
This product is designed as a general display light source usage, and it has applied the measurement standard
that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional application
(ex. Light source for sensor, optical communication and etc) except general display light source.
3
2009-04-28