TL21W01-L Datasheet, PDF (3/14 Pages) Toshiba Semiconductor – LED Lamps InGaN and Phosphor

TL21W01-L(T34
5. Handling Precautions
• This product is sensitive to electrostatic and care must be fully taken when handling products. Particularly
in the case that an overvoltage shall be applied, the overflowed energy may cause damage to or possibly
result in destruction of the product. Users shall take absolutely secure countermeasures against
electrostatic and surge when handling the product.
• Since this product is intended to be used for display lighting, the measurement standard is based on the
spectral sensitivity of the human eye. It is not intended to be used for any applications other than display
lighting (e.g., sensors and light communications systems.)
• Please note the handling of products during evaluation.
1. Please do not apply pressure to the upper surface of the product with finger, tweezers, and others.
Failure of product to light up may occur due to package deformation, wire deformation and/or
disconnection.
2. Should tweezers be used in product handling, one with flat surfaces is recommended.
3. Please handle the product widthwise.
4. Please do not drop the product. There is a possibility for package transformation etc. to occur when the
product is dropped.
5. Please do not stack the printed circuit boards on which the product is mounted to prevent damages to
product surface. Also, please note not to damage the surface of the product with cushioning material etc.
Surface damage to the product may influence their optical characteristics.
3
2011-10-20
Rev.1.0