TC74HC4066AP_07 Datasheet, PDF (3/13 Pages) Toshiba Semiconductor – CMOS Digital Integrated Circuit Silicon Monolithic Quad Bilateral Switch

Absolute Maximum Ratings (Note 1)
TC74HC4066AP/AF/AFN/AFT
Characteristics
Symbol
Rating
Unit
Supply voltage range
Control input voltage
Switch I/O voltage
Control input diode current
I/O diode current
Switch through Current
DC V_CC/ground current
Power dissipation
Storage temperature
V_CC
V_IN
V_I/O
I_IK
I_OK
I_OUT
I_CC
P_D
T_stg
−0.5 to 13
V
−0.5 to V_CC + 0.5
V
−0.5 to V_CC + 0.5
V
±20
mA
±20
mA
±25
mA
±50
mA
500 (DIP) (Note 2)/180 (SOP/TSSOP)
mW
−65 to 150
°C
Note 1:
Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 2: 500 mW in the range of Ta = −40 to 65°C. From Ta = 65 to 85°C a derating factor of −10 mW/°C should be
applied up to 300 mW.
Operating Ranges (Note)
Characteristics
Symbol
Rating
Unit
Supply voltage
Control input voltage
Switch I/O voltage
Operating temperature
Input rise and fall time
V_CC
V_IN
V_I/O
T_opr
t_r, t_f
2 to 12
V
0 to V_CC
V
0 to V_CC
V
−40 to 85
°C
0 to 1000 (V_CC = 2.0 V)
0 to 500 (V_CC = 4.5 V)
ns
0 to 400 (V_CC = 6.0 V)
0 to 250 (V_CC = 10.0 V)
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused control inputs must be tied to either VCC or GND.
3
2007-10-01