TC74HC377AP_07 Datasheet, PDF (3/9 Pages) Toshiba Semiconductor – CMOS Digital Integrated Circuit Silicon Monolithic Octal D-Type Flip-Flop

System Diagram
TC74HC377AP/AF
Absolute Maximum Ratings (Note 1)
Characteristics
Symbol
Rating
Unit
Supply voltage range
V_CC
−0.5 to 7
V
DC input voltage
V_IN
−0.5 to V_CC + 0.5
V
DC output voltage
V_OUT
−0.5 to V_CC + 0.5
V
Input diode current
Output diode current
I_IK
±20
mA
I_OK
±20
mA
DC output current
I_OUT
±25
mA
DC V_CC/ground current
I_CC
±50
mA
Power dissipation
P_D
500 (DIP) (Note 2)/180 (SOP)
mW
Storage temperature
T_stg
−65 to 150
°C
Note 1:
Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 2: 500 mW in the range of Ta = −40 to 65°C. From Ta = 65 to 85°C a derating factor of −10 mW/°C shall be
applied until 300 mW.
3
2007-10-01