TMP86FS28FG Datasheet, PDF (248/272 Pages) Toshiba Semiconductor – 8 Bit Microcontroller

18. Serial PROM Mode
18.6 Operation Mode
TMP86FS28FG
this case, FAH). If the 5th byte does not contain the operation command data, the device enters the
halt condition after transmitting 3 bytes of operation command error code (63H).
4. The 7th through m’th bytes of the transmitted and received data contain the same data as in the flash
memory writing mode.
5. The n'th byte contains the status to be transmitted to the external controller in the case of the success-
ful read protection.
Page 236