|
TA1201CNG Datasheet, PDF (21/46 Pages) Toshiba Semiconductor – I2C BUS CONTROL NTSC 1CHIP COLOR TV IC | |||
|
◁ |
TEST CONDITION
NOTE
ITEM
1 Video Detected Output
Level
BUS MODE
(06) (07) (08) (0A)
(00) (20) (20) â
2 Input Sensitivity
ââââ
3 Sync. Tip Level
ââââ
4 Output Level for No Input â â â â
5 Differencial Gain
Differencial Phase
ââââ
TA1201CNG
TEST CONDITION (VCC = 9V, Ta = 25±3°C)
MEASUREMENT METHOD
(1) Apply the IF signal. (f0 = 45.75MHz, 87.5% AM,
31.6mVrms) to IF input.
(2) Measure the output signal level at pin 47. (V01)
(3) Apply the signal (100% AM, 31.6mVrms) to IF input.
(4) Measure the output signal level pin 47. (V02)
(1) Apply the signal (f0 = 45.75MHz, 30% AM, 31.6mVrms)
to IF input.
(2) Decrease input signal level. Measure the input signal level at IF input, when
output signal level at pin 47 decreases as â3dB level. (VIN MIN)
(3) Increase input signal level. Measure the input signal level at IF input, when
output signal level at pin 47 increases as +0.5dB level. (VIN MAX)
(1) Apply the signal (f0 = 45.75MHz, 31.6mVrms, Non modulation) to IF input.
(2) Measure the DC voltage at pin 47 (VSYNC)
(1) Non IF input
(2) Apply 3.0V at pin 5.
(3) Measure the DC voltage at pin 47. (VIF)
(1) Apply the IF signal (f0 = 45.75MHz, 87.5% AM Video) to IF input.
(2) Measure the differencial gain and phase at pin 47.
21
2004-05-24
|
▷ |