TLPGE23TP_09 Datasheet, PDF (2/7 Pages) Toshiba Semiconductor – Panel Circuit Indicator

TL(PGE,FGE,GE,PYE)23TP(F)
Absolute Maximum Ratings (Ta = 25°C)
Product Name
TLPGE23TP(F)
TLFGE23TP(F)
TLGE23TP(F)
TLPYE23TP(F)
Forward Current
I_F (mA) (Note 1)
50
50
50
50
Reverse Voltage
V_R (V)
4
4
4
4
Power Dissipation
P_D (mW)
120
120
120
120
Operating
Temperature
T_opr (°C)
−40 to 100
Storage
Temperature
T_stg (°C)
−40 to 120
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Forward current derating
I_F – Ta
80
60
40
20
0
0
20
40
60
80
100
120
Ambient temperature Ta (°C)
Electrical and Optical Characteristics (Ta = 25°C)
Product Name
Emission Wavelength
Luminous Intensity
I_V
λ_d
λ_P
Δλ
Min
Typ.
I_F
I_F
Min Typ. Max _{Typ. Typ.}
TLPGE23TP(F) -
558 564 562 14
20
850 3000 20
TLFGE23TP(F) 559 565 570 568 15
20 1530 5000 20
TLGE23TP(F) 565 571 576 574 17
20 2720 7000 20
TLPYE23TP(F) 574 580 586 583 14
20 2720 8000 20
Unit
nm
mA
mcd
Forward Voltage
V_F
Typ. Max
I_F
2.1
2.4
20
2.0
2.4
20
2.0
2.4
20
2.0
2.4
20
V
mA
Reverse
Current
I_R
Max V_R
50
4
50
4
50
4
50
4
μA
V
Precautions
Please be careful of the following:
• Soldering temperature: 260°C max, soldering time: 3 s max
(soldering portion of lead: up to 1.6 mm from the body of the device)
• If the lead is formed, the lead should be formed up to 1.6 mm from the body of the device without forming stress
to the resin. Soldering should be performed after lead forming.
• This visible LED lamp also emits some IR light.
If a photo detector is located near the LED lamp, please ensure that it will not be affected by this IR light.
2
2009-01-26